|
 |
|
Operating Specifications |
 Power
Requirements: 12 to 24VDC* |
|
Outputs:
One N/O, One N/C 2A 30VDC Resistive, 1/2A 125VAC |
|
Jumper Selectable Relay (Normally ON or OFF) for
fail safe or fail secure operation. |
|
Adjustable Output Time: 1 to 40 seconds |
|
Field Selectable Illumination: Red/Green/None,
Externally Controlled or Switch Activated |
|
Current Draw: <10mA min,
<120mA max |
|
Operating Temperature:-40°C
to +70°C (-40°F
to +160°F) |
|
Installed
Operating Environment: IP66 |
| |
|
Physical Specifications |
Dimensions:
|
Narrow
|
4
½" H |
1 ¾" W |
1 ¼" D |
|
Single Gang
|
4
½" H
|
2 ¾" W |
1 ¼" D |
|
| |
Weight:
|
Narrow |
5.1 oz. |
|
Single
Gang |
7.2 oz. |
|
|
Material:
1/8" Stainless
Steel Faceplate |
| |
|
Installation Application |
|
Indoor |
|
Outdoor |
|
Harsh |
|
High Use |
| |
|
Mounting Methods |
|
Narrow
Flush Mount or Surface Mount with optional Spacer Ring |
|
Single
Gang
U.S. Single
gang switch box or optional
mounting
Single Gang Back Box |
|
Phillips Stainless steel #6 screws are included. |
|
For enhanced vandal resistance, security screws are
recommended. Consult your local fire district. |
| |
|
Custom Graphics
Available (Engraved in Red or Laser Marked in Black) |
|
Limited Lifetime Warranty |
| |
|
*Important Note:
Due to the electrical design of Essex Piezoelectric Switches, they will
not operate with <11VDC. Backup power (i.e. UPS) is required for
operation during a power interruption. Some local building or fire
safety regulations may limit the use of electronic exit buttons. Consult with
local officials prior to installing electronic buttons
for egress applications. |
|
| Part No. |
Description
|
Faceplate
Graphics
|
|
PEBA-1 |
Piezoelectric
Switch Assembly |
N/A - No
faceplate |
|
PEBSS0-US
|
U.S. Single Gang
Piezoelectric Switch |
No Graphics |
|
PEBSS2-US
|
U.S. Single Gang
Piezoelectric Switch |
"PUSH TO EXIT"
in Red |
|
PEBSS4-US
|
U.S. Single Gang
Piezoelectric Switch |
"EMERGENCY EXIT"
in Red |
|
PEBSS6-US |
U.S. Single Gang
Piezoelectric Switch |
"PUSH TO
OPEN"
in Red |
|
PEBSS2MX-US
|
U.S. Single Gang
Piezoelectric Switch Spanish |
"PRESIONE
PARA SALIR"
in Red |
|
PEBSS6MX-US
|
U.S. Single Gang
Piezoelectric Switch Spanish |
"PRESIONE
PARA ABRIR"
in Red |
|
PEBSSCB-US
|
Custom U.S. Single Gang
Piezoelectric Switch |
Custom Laser
Marked in Black |
|
PEBSSCR-US
|
Custom U.S. Single Gang
Piezoelectric Switch |
Custom Engraved
in Red |
|
PEBSSN0
|
Narrow Piezoelectric
Switch, Blank |
No Graphics |
| PEBSSN2
|
Narrow
Piezoelectric Switch |
"PUSH TO EXIT"
in Red |
| PEBSSN6 |
Narrow
Piezoelectric Switch |
"PUSH TO
OPEN"
in Red |
| PEBSSN2MX
|
Narrow
Piezoelectric Switch Spanish |
"PRESIONE
PARA SALIR"
in Red |
| PEBSSN6MX
|
Narrow
Piezoelectric Switch Spanish |
"PRESIONE
PARA ABRIR"
in Red |
| PEBSSNCB |
Custom Narrow
Piezoelectric Switch |
Custom Laser
Marked in Black |
| PEBSSNCR |
Custom Narrow
Piezoelectric Switch |
Custom Engraved
in Red |
| PS-12DC |
12 Volt DC Power
Supply - 1.5A w/6'Cord |
N/A |
Warning!!!
Beware of inferior offshore (Made in CHINA) knockoffs that look like Essex Piezoelectric
Switches. Essex Piezoelectric Switches are the original, designed
and manufactured in Carpinteria, CA by Essex Electronics, Inc.
Proud to be a U.S. Corporation. |
