Videos

product videos

CUSTOMIZATION

Customize your Essex card reader or hands-free access switch. This video shows various customization options available on the following Essex products: RoxProx II Proximity Readers, iRox Series Smart Card Readers, and Hand-E-Wave Hands-Free Access Switches.

For product information on customization, contact Essex at 1-800-KEYLESS

FISH TANK

This short video shows an Essex RoxProx Reader operating underwater at a recent event. The readers used in this video were modified production units. The audio beepers were removed from the back of the readers and connected it to wires running outside of the Fish Tank.

Essex Electronics does NOT recommend any attempt to copy this demonstration. Extreme caution should be used when running an electronic device under water.

HAND-E-WAVE INSTALLATION

This video demonstrates the procedure used to install an Essex Hand-E-Wave Touchless Access Switch at a 450-bed hospital. In this installation, an existing touch switch was replaced. The Hand-E-Wave switch is configured for a one second timed output and used to activate a Stanley Automatic Door Opener.

Please note: Essex Electronics, Inc. does not perform any installation services and recommends that installation of the Hand-E-Wave be performed by a qualified 12V installer. The product should be installed and used in accordance with Essex Installation Instructions. For more information about Hand-E-Wave features and specifications, please visit Hand-E-Wave

IMPACT TEST

This video shows IK10 impact testing performed on an Essex RoxProx IP Proximity Card Reader and Piezoelectric Touch Switch. According to Standards IEC 62262 and EN 50102, the product must be struck 5 times by a 5 kilogram (11 lb) weight dropped from 400 mm (15.78 inches). Impact energy = 20 Joules

For product information visit RoxProx IP Series

ROXPROX AND PIEZOELECTRIC SWITCH PRODUCT TESTING

This video demonstrates Temperature/ Humidity, Electrostatic Discharge, IK 10 Impact, and IP65 Ingress Protection Testing performed on Essex RoxProx IP Series Rugged Proximity Reader and PEB IP Series Piezoelectric Switch. Essex manufacturing capabilities are also shown.

For more information please visit one of the following products or contact Essex at 1-800-KEYLESS
RoxProx – 125kHz Proximity Reader that ties to a traditional OEM access control panel.
RoxProx IP Series – Transmits 125kHz Wiegand data over Ethernet to a host computer.
PEB Series – Industrial grade, timed electronic switch.

VEHICLE KEYLESS ENTRY INSTALLATION

This video overviews the procedure used to install an Essex AKE-5 Keypad Keyless Entry® System on a 2004 Chevy Tahoe.

Essex Electronics, Inc. does not perform any installation services and recommends that installation of the AKE-5 be performed by a qualified 12V installer. The product should be installed and used in accordance with Essex Operating and Installation Instructions. Under no circumstances will Essex Electronics, Inc. be liable for any damages incurred to the vehicle or any individual during installation or operation of this product. For more information about features and specifications, please visit AKE-5 Series

CUSTOMIZATION

Customize your Essex card reader or hands-free access switch. This video shows various customization options available on the following Essex products: RoxProx II Proximity Readers, iRox Series Smart Card Readers, and Hand-E-Wave Hands-Free Access Switches.

For product information on customization, contact Essex at 1-800-KEYLESS

FISH TANK

This short video shows an Essex RoxProx Reader operating underwater at a recent event. The readers used in this video were modified production units. The audio beepers were removed from the back of the readers and connected it to wires running outside of the Fish Tank.

Essex Electronics does NOT recommend any attempt to copy this demonstration. Extreme caution should be used when running an electronic device under water.

HAND-E-WAVE INSTALLATION

This video demonstrates the procedure used to install an Essex Hand-E-Wave Touchless Access Switch at a 450-bed hospital. In this installation, an existing touch switch was replaced. The Hand-E-Wave switch is configured for a one second timed output and used to activate a Stanley Automatic Door Opener.

Please note: Essex Electronics, Inc. does not perform any installation services and recommends that installation of the Hand-E-Wave be performed by a qualified 12V installer. The product should be installed and used in accordance with Essex Installation Instructions. For more information about Hand-E-Wave features and specifications, please visit Hand-E-Wave

IMPACT TEST

This video shows IK10 impact testing performed on an Essex RoxProx IP Proximity Card Reader and Piezoelectric Touch Switch. According to Standards IEC 62262 and EN 50102, the product must be struck 5 times by a 5 kilogram (11 lb) weight dropped from 400 mm (15.78 inches). Impact energy = 20 Joules

For product information visit RoxProx IP Series

ROXPROX AND PIEZOELECTRIC SWITCH PRODUCT TESTING

This video demonstrates Temperature/ Humidity, Electrostatic Discharge, IK 10 Impact, and IP65 Ingress Protection Testing performed on Essex RoxProx IP Series Rugged Proximity Reader and PEB IP Series Piezoelectric Switch. Essex manufacturing capabilities are also shown.

For more information please visit one of the following products or contact Essex at 1-800-KEYLESS
RoxProx – 125kHz Proximity Reader that ties to a traditional OEM access control panel.
RoxProx IP Series – Transmits 125kHz Wiegand data over Ethernet to a host computer.
PEB Series – Industrial grade, timed electronic switch.

VEHICLE KEYLESS ENTRY INSTALLATION

This video overviews the procedure used to install an Essex AKE-5 Keypad Keyless Entry® System on a 2004 Chevy Tahoe.

Essex Electronics, Inc. does not perform any installation services and recommends that installation of the AKE-5 be performed by a qualified 12V installer. The product should be installed and used in accordance with Essex Operating and Installation Instructions. Under no circumstances will Essex Electronics, Inc. be liable for any damages incurred to the vehicle or any individual during installation or operation of this product. For more information about features and specifications, please visit AKE-5 Series